AIRCUT-65 I Inverter Based Air Plasma Cutting Machine Warpp
Aircut- i Series Machine are Inverter Based Air Plasma Cutting Machines. They Are Widely Used for Cutting Ferrous as well as Non Ferrous Metals Using Inexpensive Air as the Cutting Media. These Machines are available in 65 Amps
FEATURES
- Advanced ‘Soft Switching’ Technology, Hence More Reliability.
- High Frequency Arc Striking with Pilol Arc.
- Stable Out Put Current
- Cutting Current Will Slowly Increase to Increase the
- Life of Electrodes Nozzle.
- Precise Preset & Display of Cutting Current
- Air Test Switch to Set the Air Flow Precisely
- High Power Factor & Efficiency.
- Good Cutting Quality.
- Continuous Adjustment of Current Possible.
Basic Outfits :
- Power Source, 5 mtr Long Air Plasma Cutting Torch, Air Filter & Earthing Cable,Nozzle, 3 sets of Electrode.
Optional Accessories :
- Machine mountable Straight torch.
- Plasma trolley with rail.
- Torch pendant for ON/OFF control
Categories: WARPP PRODUCTS, Welding Equipment
Description
| Model | Input Power (KVA) |
Current Range | Duty Cycle | Weight (Kg) |
Cutting Thickness |
No Load Voltage (DC) |
|---|---|---|---|---|---|---|
| AIRCUT -65 i | 9.5 | 25-65 | 60% | 26 |
Clean cut in MS, SS- 12mm Rough cut MS, SS-18mm |
380 |
| Input Supply-380~440 V 3-Phhase 50hz supply |
| Power Factor -0.9 |
| Dimension L*W*H(mm)-570*270*520 |
| Air pressure requirement in 5~6 kg/cm2 or 0.4-0.6MPa | Airflow required(CFM)-5~6 or ≥ 180 L/min |